Skip to end of banner
Go to start of banner

Custom field setup

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »


Before you can start using the Mapit plugin, you need to set up some custom fields to store location information for issues. 


1. Geographic coordinate system

Select which geographic coordinate system you would like to use for storing the issue position. Supported formats are latitude/longitude (default) and UTM.


2. Creating custom fields

Mapit makes use of 3 different custom fields to store location information. If you don't have these fields already, you need to create them: 

  1. A custom field to store geographic latitude position.  
    We recommend that the custom field name contains "Lat" or "Latitude" (or translations of these). We also recommend adding some explanatory text in the custom field description, such as: "Geographic latitude position for this issue. Format is decimal degrees, e.g. 52.5170365"
     
  2. A custom field to store geographic longitude position
    We recommend that the custom field name contains "Long" or "Longitude" (or translations of these). We also recommend adding some explanatory text in the custom field description, such as: "Geographic longitude position for this issue. Format is decimal degrees, e.g. 13.3888599"
     
  3. A custom field to store address information
    We recommend that the custom field name contains "Address" for clarity.

If you have opted for UTM Geographic coordinate system, use only one field holding the value with the position.

If you have opted for UTM Geographic coordinate system, you need 2 different custom fields.

  1. A custom field to store UTM position.  
    We recommend that the custom field name contains "UTM" (or translation). We also recommend adding some explanatory text in the custom field description, such as: "Geographic UTM position for this issue. For instance: 33 N 562288 7632649"
  2. A custom field to store address information
    We recommend that the custom field name contains "Address" for clarity.


Please refer to the following Atlassian documentation page for more information on how to create custom fields:



3. Placing custom fields on screens

The custom fields (latitude position, longitude position and address or UTM position and adress) need to be placed on issue screens in order for them to be visible to your users. If creating custom fields from the admin section, you will be asked to do this in the last step of the creation process, but you can also do this manually. Please refer to the following Atlassian documentation for your preferred method:


4. Associate custom fields with Mapit parameters

Once the custom fields have been created, they need to be mapped to the correct Mapit parameters. Go to the add-ons administration section of your JIRA instance, and choose "General configuration" in the Mapit Configuration section. 

  1. First, select the custom field that should be used to store latitude position

  2. Next, select the custom field that should be used to store longitude position

  3. Finally, select the custom field that should be used to store address information



Only custom fields of supported types will be listed in the drop-downs.



All custom fields must be of the supported types:



  • No labels